Dimensions |
13,2 × 9,51 × 4,42 mm |
Mobile module |
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0 Gbps DL, 200 Mbps UL; 3G – 42 Mbps DL, 5.76 Mbps UL.
|
SIM switch |
2 SIM cards, auto-switching envelopes: weak signal, data limit, SMS limit, roaming, no network, network disabled, data connection failure, SIM idle protection.
|
Olek |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received, band connected, IMSI, ICCID, operator aggregation.
|
USSD |
Supports the sending and reading of unstructured premium rate data messages.
|
Black/white list |
Operator black/white list
|
Several PDNs |
Ability to use different PDNs for multiple network access and services
|
Managing the band |
Bar lock, used bar status display
|
APN |
Automatic APN
|
Sild |
Direct connection (bridge) between the mobile internet service provider and the device on the LAN.
|
Get through |
The router assigns its mobile WAN IP address to another device on the LAN.
|
Wireless mode |
802.11b/g/n/ac Wave 2 (WiFi 5) with data rates up to 867 Mbps (dual-band, MU-MIMO), 802.11r high-speed transition, Access Point (AP), Station (STA).
|
WiFi security |
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, auto-encryption modes, client isolation.
|
SSID/ESSID |
ESSID hidden mode
|
WiFi users |
up to 150 simultaneous connections
|
Wireless coverage |
Restricted portal (hotspot), internal/external Radius server, built-in customisable landing page.
|
Wireless network/roaming |
Wireless network (802.11s), high-speed roaming (802.11r)
|
WAN |
1 x WAN port 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic MDI/MDIX interworking.
|
LAN |
4 x LAN ports, 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic MDI/MDIX interworking.
|
Routing |
Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP).
|
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake Lan (WOL).
|
VoIP gateway support |
NAT clients for H.323 and SIP-alg protocols, enabling correct routing of VoIP packets.
|
Community monitoring |
Ping for Reboot, Wget Reboot, Peridic Reboot, LCP and ICMP link checking
|
Network Firewall |
Port forward, traffic rules, custom rules
|
DHCP |
Static and dynamic IP distribution, DHCP relay, relay relay
|
QoS / Smart Queue Management (SQM) |
Traffic priority order by source/destination, service, protocol or port, WMM, 802.11e
|
DDNS |
Supported >25 service providers, others can be manually configured.
|
Network backup |
WiFi WAN, mobile, VRRP, wired trunks, all of which can be used as auto troubleshooters.
|
Load balancing |
Balance internet traffic across multiple WAN connections
|
Hotspot |
Internal/external Radius server, built-in customisable landing page, closed portal
|
SSHFS |
Ability to connect to a remote file system via SSH protocol
|
Authentication |
Pre-shared key, digital certificates, X.509 certificates
|
Firewall |
Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
|
Preventing attacks |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scanning prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scanning attacks).
|
VLAN |
Port and tag-based VLAN separation
|
Mobile quota checks |
Custom data limits for both SIM cards
|
VEEBI filter |
Black list to block unwanted websites, white list to designate only allowed sites
|
Access control |
Flexible TCP, UDP, ICMP packet access control, MAC address filtering
|
OpenVPN |
Multiple clients and servers can work simultaneously, 12 encryption methods available
|
OpenVPN encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
|
IPsec |
IKEv1, IKEv2, 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256).
|
GRE |
GRE tunnel
|
PPTP, L2TP |
Client/server copies can run concurrently, L2TPv3 support.
|
DMVPN |
Method of creating scalable IPsec VPNs
|
SSTP |
SSTP client copy support
|
ZeroTier |
ZeroTier VPN client support
|
WireGuard |
WireGuard VPN client and server support
|
ID range |
Reply to one of the IDs between [1;255] or any of the following
|
Authorise remote access |
Allow access via WAN
|
Custom registers |
MODBUS TCP custom registry block queries that read/write to a file on the router and can be used to extend MODBUS TCP Slave functionality.
|
Supported features |
01, 02, 03, 04, 05, 06, 15, 16
|
Supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: floating point, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC).
|
Protocol |
HTTP(S), MQTT, Azure MQTT
|
MQTT gateway |
Ability to send commands and receive data from MODBUS Master via MQTT broker.
|
Supported modes |
TCP Master, DNP3 Outstation
|
SSH |
SSH (v1, v2)
|
SMS |
SMS status, SMS configuration, SMS sending/reading via HTTP POST/GET.
|
Call |
Reboot, status, mobile data on/off, output on/off, answer/end call with timer, WiFi on/off
|
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly Technique, AVSystem
|
MQTT |
MQTT Broker, MQTT Publisher
|
SNMP |
SNMP (v1, v2, v3), SNMP Trap
|
JSON-RPC |
Management API via HTTP/HTTPS
|
MODBUS |
MODBUS TCP status/control
|
IoT platforms in the cloud |
Allows you to monitor: device data, mobile data, network information, availability.
|
ThingWorx |
Allows you to monitor: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type.
|
Accumulation |
Allows you to track: device model, version and serial number, WAN type and IP, mobile phone ID, ICCID, IMEI, connection type, operator, signal strength.
|
Azure IoT Hub |
Can send device IP, number of bytes sent/received, temperature, number of PINs to Azure IoT Hub server, mobile connection status, network connection status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM status, PIN status, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type.
|
Processor |
Quad-core ARM Cortex A7, 717 MHz
|
RAM |
256 MB (100 MB available for user space)
|
FLASH storage |
256 MB (80 MB available for user space)
|
WEB UI |
Refresh the FW file, check the FW on the server, configuration profiles, configuration backup, restore point.
|
FOTA |
Refresh FW
|
RMS |
Update FW/configuration for multiple devices at once
|
Keep the settings |
Update FW without losing the current configuration
|
Operating system |
RutOS (OpenWrt-based Linux OS)
|
Languages supported |
Busybox shell, Lua, C, C++
|
Development tools |
SDK package with building environment
|
GNSS |
GPS, GLONASS, BeiDou, Galileo and QZSS.
|
Coordinates |
GNSS coordinates via WebUI, SMS, TAVL, RMS.
|
NMEA |
NMEA 0183
|
NTRIP |
NTRIP protocol (RTCM network transport over the Internet Protocol)
|
Server software |
Supported server software TAVL, RMS
|
Data transfer speed |
USB 2.0
|
Applications |
Samba sharing, USB-Jada
|
External equipment |
Ability to connect an external HDD, memory stick, modem, printer.
|
Storage formats |
FAT, FAT32, NTFS
|
Input from |
1 x digital input, 0-6 V detected logically low, 8-30 V detected logically high.
|
Printed from |
1 x digital output, open collector output, max output 30 V, 300 mA
|
Events |
E-mail, RMS, SMS
|
I/O juggler |
Allows you to set certain I/O conditions to trigger an event.
|
Community |
4-contact industrial DC socket outlet
|
Input voltage range |
9-50 VDC, reverse polarity protection, overvoltage protection >51 VDC 10us max
|
PoE (passive) |
Passive PoE via backup pairs. Enabled via LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt, mode B, LAN1 port, 9-50 VDC.
|
Energy demand |
Idle: < 4W, Max: 18W
|
Ethernet |
5 x RJ45 ports, 10/100/1000 Mbps
|
I/O-d |
1 x digital input, 1 x digital output on 4-contact power socket
|
Oleku LEDs |
3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x power LED, 2 x 2.4G and 5G WiFi LEDs.
|
SIM |
2 x SIM socket (Mini SIM – 2FF), 1.8 V/3 V
|
Power |
1 x 4-contact power plug
|
Antennids |
4 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNNS
|
USB |
1 x USB A port for peripherals
|
Source from |
Restart/reset user defaults/factory reset button
|