| Weight |
0,241 kg |
| Dimensions |
10 × 9,34 × 3 mm |
| Mobile module |
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0 Gbps DL, 200 Mbps UL; 3G – 42 Mbps DL, 5.76 Mbps UL.
|
| Olek |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received, connected band, IMSI, ICCID
|
| SMS |
SMS status, SMS setup, Send/Read SMS via HTTP POST/GET, SMS to EMAIL, SMS to EMAIL, SMS to email, SMS to HTTP, SMS to SMS, SMS to SMS, SMS scheduled, SMS auto-response, SMPP
|
| USSD |
Supports the sending and reading of unstructured premium rate data messages.
|
| Black/white list |
Operator black/white list
|
| Several PDNs |
Ability to use different PDNs for multiple network access and services
|
| Managing the band |
Bar lock, used bar status display
|
| APN |
Automatic APN
|
| Sild |
Direct connection (bridge) between the mobile internet service provider and the device on the LAN.
|
| Getting through |
The router assigns its mobile WAN IP address to another device on the LAN.
|
| LAN |
1 x LAN port, 10/100/1000 Mbps, supports automatic MDI/MDIX trunking
|
| Routing |
Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP).
|
| Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake Lan (WOL).
|
| VoIP gateway support |
NAT clients for H.323 and SIP-alg protocols, enabling correct routing of VoIP packets.
|
| Community monitoring |
Ping for Reboot, Wget Reboot, Peridic Reboot, LCP and ICMP link checking
|
| DHCP |
Static and dynamic IP distribution, DHCP relay, relay relay
|
| SQM |
Traffic priority order by source/destination, service, protocol or port, WMM, 802.11e
|
| DDNS |
Supported >25 service providers, others can be manually configured.
|
| Network backup |
Mobile, VRRP, wired sockets, each of which can be used as an automatic fail-safe.
|
| Load balancing |
Balance internet traffic across multiple WAN connections
|
| Authentication |
Pre-shared key, digital certificates, X.509 certificates
|
| Firewall |
Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
|
| Preventing attacks |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scanning prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scanning attacks).
|
| VLAN |
Port and tag-based VLAN separation
|
| Mobile quota checks |
SIM card custom data limits
|
| VEEBI filter |
Black list to block unwanted websites, white list to designate only allowed sites
|
| Access control |
Flexible TCP, UDP, ICMP packet access control, MAC address filtering
|
| OpenVPN |
Multiple clients and servers can work simultaneously, 12 encryption methods available
|
| OpenVPN encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
|
| IPsec |
IKEv1, IKEv2, 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256).
|
| GRE |
GRE tunnel
|
| PPTP, L2TP |
Client/server copies can run concurrently, L2TPv3 support.
|
| Tunnel |
A buffer server created to add TLS encryption functionality to existing clients and servers without changing the program code.
|
| DMVPN |
Method of creating scalable IPsec VPNs
|
| SSTP |
SSTP client copy support
|
| ZeroTier |
ZeroTier VPN client support
|
| WireGuard |
WireGuard VPN client and server support
|
| ID range |
Matches one ID in the range [1;255]
|
| Authorise remote access |
Allow access via WAN
|
| Custom registers |
MODBUS TCP custom registry block queries that read/write to a file on the router and can be used to extend MODBUS TCP Slave functionality.
|
| Modbus supported functions |
01, 02, 03, 04, 05, 06, 15, 16
|
| Modbus supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: floating point, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC).
|
| Protocol |
HTTP(S), MQTT, Azure MQTT
|
| MQTT gateway |
Ability to send commands and receive data from MODBUS Master via MQTT broker.
|
| DNP3 supported modes |
TCP Master, DNP3 Outstation
|
| SSH |
SSH (v1, v2)
|
| Monitoring and management by SMS |
SMS status, SMS configuration, SMS sending/reading via HTTP POST/GET.
|
| Call |
Reset, status, mobile data on/off, output on/off, answer/call disconnect with timer
|
| TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly Technique, AVSystem
|
| MQTT |
MQTT Broker, MQTT Publisher
|
| SNMP |
SNMP (v1, v2, v3), SNMP Trap
|
| JSON-RPC |
Management API via HTTP/HTTPS
|
| MODBUS |
MODBUS TCP status/control
|
| IoT platforms-cloud |
Allows you to monitor: device data, mobile data, network information, availability.
|
| ThingWorx |
Allows you to monitor: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type.
|
| Accumulation |
Allows you to track: device model, version and serial number, WAN type and IP, mobile phone ID, ICCID, IMEI, connection type, operator, signal strength.
|
| Azure IoT Hub |
Can send device IP, number of bytes sent/received, temperature, number of PINs to Azure IoT Hub server, mobile connection status, network connection status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM status, PIN status, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type.
|
| Processor |
Single-core ARM Cortex A7, 1.5 GHz
|
| RAM |
256 MB (128 MB available for user space)
|
| FLASH storage |
512 MB (200 MB available for user space)
|
| WEB UI |
Refresh the FW from the file, check the FW on the server, configuration profiles, configuration backup, restore point.
|
| FOTA |
Refresh FW
|
| RMS |
Update FW/configuration for multiple devices at once
|
| Preservation of equipment |
Update FW without losing the current configuration
|
| Operating system |
RutOS (OpenWrt-based Linux OS)
|
| Languages supported |
Busybox shell, Lua, C, C++
|
| Development tools |
SDK package with building environment
|
| Input from |
1 x digital input, 0-6 V detected logically low, 8-30 V detected logically high.
|
| Printed from |
1 x digital output, open collector output, max output 30 V, 300 mA
|
| Events |
E-mail, RMS, SMS
|
| I/O juggler |
Allows you to set certain I/O conditions to trigger an event.
|
| Community |
4-contact industrial DC socket outlet
|
| Input voltage range |
9-30 VDC, reverse polarity protection, overvoltage protection +/-1 kV 50 µs max
|
| Energy demand |
Idle power: < 3 W, max < 6 W
|
| Ethernet |
1 x RJ45 port, 10/100/1000 Mbps
|
| I/O-d |
2 x configurable I/O contacts on 4-contact power socket
|
| Oleku LEDs |
3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x power LED.
|
| SIM |
1 x SIM card slot (Mini SIM – 2FF), 1.8 V/3 V
|
| Power |
1 x 4-contact power plug
|
| Antennids |
4 x SMA for mobile
|
| USB |
1 x virtual network interface via micro-USB
|
| Reset |
Restart/reset user defaults/factory reset button
|
| Installation options |
DIN-connectors, flat surface
|
| Operating temperature |
-40 °C to 75 °C
|
| Working humidity |
10% to 90% non-condensable
|
| Entrance protection rating |
IP30
|
Pay in three equal instalments 3 x 
